Switching the Paper Source to Match the Purpose
In this printer, there are two paper sources, a manual feed tray and a top feed.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
You can also set the paper source on the Quick Setup tab.
Open the printer driver setup window
Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
Select the paper source
From the Paper Source list, select the paper source that matches your purpose.
- Manual Feed
-
Paper is supplied from the manual feed tray in the back.
Important
- When A5, B5, 4"x6" 10x15cm, 5"x7" 13x18cm, 7"x10" 18x25cm, L 89x127mm, 2L 127x178mm, Hagaki 100x148mm, or Hagaki 2 200x148mm is selected for Page Size on the Page Setup tab, paper cannot be supplied from the manual feed tray in the back.
- When Plain Paper, Hagaki A, Ink Jet Hagaki, or Hagaki is selected for Media Type on the Main tab, paper cannot be supplied from the manual feed tray in the back.
- Top Feed
-
Paper is fed from the top feed.
Important
- When Heavyweight Photo Paper, Baryta Photo Paper, Premium Fine Art Smooth, Premium Fine Art Rough, Photo Paper Pro Premium Matte A, Extra Heavyweight Fine Art Paper, or Highest Density Fine Art Paper is selected for Media Type on the Main tab, paper cannot be supplied from the top feed.
Click OK
When you perform print, the printer uses the specified paper source to print the data.
Note
- If the paper settings in the printer driver differ from the paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Register Paper Information."
For details about the paper information to be registered on the printer, see the following:
- If the paper settings in the printer driver differ from the paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Register Paper Information."